1.800.635.7330
1.800.635.7330

0 $0.00
You have no items in your shopping cart.

PowerCore 9410

PowerCore 9410

The PowerCoreTM 9410 allows you to limit the number of employees needed on site. Each model is set up with our standard direct push capability by using a 200 ft-lb. hydraulic hammer along with a 2400 ft-lb. hydraulic core motor that can core through concrete and asphalt to allow access for the collection of intact continuous soil cores. The PowerCoreTM 9410 model has all the same features and robust design as our direct push machines. It’s powered by a Kohler KDI 1903 (Tier4F) Turbo Diesel engine that provides plenty of power. It powers a 3,000 ft-lb torque auger motor at 50 RPM on low, 150 RPM on high, and a 3rd position for high-speed coring up to 650 RPM. Matched with our 200 ft-lb direct push hammer, new 72” stroke mast oscillation design, and optional 3,000 ft-lb overhead winch system makes this the most versatile truck-mounted PowerCoreTM we have ever built. Also available is our mast mounted auto-drop hammer to access all of the geotechnical demands in today’s market. All trailer and truck-mounted models can be customized with on-board generators, a slurry-vac system, a 75-gallon fresh-water tank, a 75-gallon recovery waste-water tank, tooling racks, and lockable aluminum storage compartments to fit your specific needs.



    "We use the AMS PowerCore Coring System for pavement evaluations on asphalt and concrete highways. Since the PowerCore design does not require a dedicated vehicle, this has given us greater versatility in the use of our equipment and manpower. This combined with its ease of operation has proven to be a safe, productive, and efficient addition to our equipment complement."

    --Idaho Transportation Department
 

For more technical information about the PowerCore 9410, please view: PowerCore 9410 Specification Sheet

 

For more information about the PowerCore 9410, please contact AMS.