|
No more threaded connections! The New AMS 3-1/4” Hex Quick Pin Sampling Kit allows for collection of both disturbed & relatively undisturbed core samples down to a depth of 12ft. This kit features hardened steel male/female hex connections that accept standard 3/8” snapper pins or heat treated 3/8” U-clips. The simplicity of the snap pins is unmatched for hand auger applications, while the heat treated 3/8” U-clips will allow you to hammer & reverse hammer your core sampler with confidence.
|
|
The AMS Gator Probe is a one-of-a-kind soil probe that offers the benefits of a “closed end” soil probe, but the hinged jaw quickly transforms the unit into an “Open Ended” soil probe providing easy access to the entire soil core. Outfitted with a side footpeg allows the user to easily step the probe into the ground. The gator probe is ideal for composite sampling or field extraction of representative cores for subsequent analysis by a soil lab.
|
|
The AMS Frozen Soil Powered Auger Kit was designed to core through those dreaded frozen soil conditions. The Core Barrel Auger is equipped with carbide cutting teeth that are specifically designed to chew through tough frozen soil and pull relatively undisturbed cores inside the barrel.
|
|
The new AMS Deluxe Fiberglass Auger Kit provides some protection against possible electric shock when working in areas where buried electric cables may be present. This kit features the trusted AMS Signature Series thread pattern.
|
|
The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater measurements and collect samples to a depth of 12ft., below ground surface.
|
|
AMS BioBailers™ have all the same characteristics you expect from ESP’s Clear-View bailers. They are easy to use, clean, and made of high-quality materials. They have been tested for non-leaching using the SPLP EPA 1312 extraction process followed by analysis using EPA 8260 for volatiles and EPA 8270 for semi-volatiles. They provide assurance of clear and accurate samples, and they will biodegrade in a few years – no longer adding plastic to our landfills.
|
|
Discounted Scratch & Dent Cross Handles
AMS Cross Handles are connected to AMS extensions – which are then connect to AMS augers and other samplers. Scratch & Dent Cross Handles have limited quantities. Discounts available while supplies last. Please call to confirm availability.
|
|
2 1/8" Flighted Auger with 2 1/2" Tip
This flighted auger is great for installing Whitmire® Advance termite bait stations.
Was $134.61
Now $79.00
Limited Quantity Available
|
|
Discounted Concrete Core Bits
Discounted concrete core bits from Bosh, Rawl, Hawera, and Milwaukee.
|
|
3-1/4” Hex Quick Pin Sampling Kit
No more threaded connections! The New AMS 3-1/4” Hex Quick Pin Sampling Kit allows for collection of both disturbed & relatively undisturbed core samples down to a depth of 12ft. This kit features hardened steel male/female hex connections that accept standard 3/8” snapper pins or heat treated 3/8” U-clips. The simplicity of the snap pins is unmatched for hand auger applications, while the heat treated 3/8” U-clips will allow you to hammer & reverse hammer your core sampler with confidence.
|
|
AMS Gator Probe
The AMS Gator Probe is a one-of-a-kind soil probe that offers the benefits of a “closed end” soil probe, but the hinged jaw quickly transforms the unit into an “Open Ended” soil probe providing easy access to the entire soil core. Outfitted with a side footpeg allows the user to easily step the probe into the ground. The gator probe is ideal for composite sampling or field extraction of representative cores for subsequent analysis by a soil lab.
|
|
NEW! AMS Fiberglass Auger Kit
The new AMS Fiberglass Auger Kit provides some protection against possible electric shock when working in areas where buried electric cables may be present. It includes a fiberglass tile probe, a fiberglass handle and extension, and a signature series soil auger.
|
|
NEW Turf Soil Moisture Meters
These meters provide instantaneous readings of root zone soil moisture. They are based on proven time-domain measurement technology. These portable units accurately measure soil moisture across the full range of soil moisture conditions. Select from the 4.8 or 8-inch (12 or 20-cm) probe rods to suit your desired depth measurement...
|
|
AMS Professional Soil Sampling Kit
These new sampling kits are designed for soil professionals who want the strongest, most durable augers, extensions, cross handles, slide hammers, and split-core samplers available. Our new professional series components also feature AMS's most reliable heavy-duty connection type, the 3/4" threaded connection.
|
|
AMS Mini Soil Core Sampling Kit
The AMS Mini Soil Core Sampling Kit has everything you need for augering to 12' and then collect a virtually undisturbed soil core sample in a liner. The kit includes a 3 1/4" regular auger, four 3' extensions, rubber-coated cross handle, 2" x 6" soil core sampler, slide hammer, 2 plastic end caps, liner, 2 wrenches, universal slip wrench and poly-canvas case.
|
|
Ratcheting Cross Handles
AMS Ratcheting Cross Handles feature a new and improved open mechanism that makes cleaning the handle easier, improving reliability. The 18" handles are fitted with comfortable grips and allow for more torque. Also, a switch is built in to allow for reverse action when using the AMS Quick Connect thread option.
|
|
Replaceable Tip Dual Purpose Soil Recovery Probes
AMS Dual Purpose Replaceable Tip Soil Recovery Probes are soil probes that can be used with or without liners, and allow for the tip of the soil probe to be replaced after heavy use! These soil probes also feature the AMS "Reach and Grab" system which allows the plastic liner to protrude from the top of the soil probe body into the top cap. This system makes it easy to remove the liner from the soil probe body without disturbing the sample.
|
|
AMS 3 1/4" Regular Soil Auger Kit
The AMS 3 1/4" Regular Soil Auger Kit is a simple soil augering set up that allows the user to auger to 4'. The 3 1/4" regular soil auger, 18" rubber-coatedcross handle and 4' extension in the kit use the AMS 5/8" Threaded connection type. Additional 5/8" Threaded extensions may be purchased separately to increase the depth to which the auger can reach.
|
|
