Gas Vapor Implants

6" Stainless Steel Implant, Stepped Fitting.   Accessories: #214.98 - (1) 3/16" ID X 1/4" OD X 50' Fluoropolymer Tubing #214.99 - (1) 3/16" ID X 1/4" OD X 100' Fluoropolymer Tubing #215.00 - (1) 3/16" ID X 1/4" OD X 250'...

12" Stainless Steel Implant, Stepped Fitting.   Accessories: #214.98 - (1) 3/16" ID X 1/4" OD X 50' Fluoropolymer Tubing #214.99 - (1) 3/16" ID X 1/4" OD X 100' Fluoropolymer Tubing #215.00 - (1) 3/16" ID X 1/4" OD X 250'...

21" Stainless Steel Implant, Stepped Fitting.   Accessories: #214.98 - (1) 3/16" ID X 1/4" OD X 50' Fluoropolymer Tubing #214.99 - (1) 3/16" ID X 1/4" OD X 100' Fluoropolymer Tubing #215.00 - (1) 3/16" ID X 1/4" OD X 250'...

The Gas Vapor Probe 6" Implant Drive Kit connects to AMS GVP extension rods and allows you to drive 6” (152mm) vapor implants to your target depth, using a rotary hammer drill or manual slide hammer attachment. This kit is used for permanent soil...

5/8" National Fine Gas Vapor Probe 6" Implant Tip Drive End.   For questions on availability, Contact us or see our FAQ section.

Dedicated Stainless Steel Vapor Point.             For questions on availability, Contact us or see our FAQ section.

6" Stainless Steel Implant, 1/4" Swagelok Fitting.   For questions on availability, Contact us or see our FAQ section.

12" Stainless Steel Implant, 1/4" Swagelok Fitting.   For questions on availability, Contact us or see our FAQ section.

Polyethylene Soil Vapor Implant is an economical way to install semi-permanent soil vapor monitoring wells. The Polyethylene Implant is a one-piece molded assembly made of high-density Porous Polyethylene.   Accessories: #214.98 - (1) 3/16" ID...

Stainless Steel Soil Vapor Implant is designed to be used as a vapor probe implant in vapor intrusion sampling, sub-slab sampling, soil gas sampling and more.   Accessories: #214.98 - (1) 3/16" ID X 1/4" OD X 50' Fluoropolymer Tubing #214...

Stainless Steel Mesh Implants are constructed of a double woven stainless steel wire screen. With the Speedfit fitting, the implant will accept tubing sizes of 1/4" OD. The solid threaded end allows for either an anchor point anchor weight or open-hole...