9500 Series

The PowerProbe 9500 Series combines high-powered direct-push and auger capabilities with operator-friendly engineering. While maintaining some of the same standard features of our larger PowerProbes, the 9500 Series models utilize smaller carrier options that allow for access into tighter areas with less footprint.


The track-mounted 9500-VTR all-terrain model can easily gain access to on or off-road sampling points, and with a surface load of only 4.9 psi, the 9500-VTR can also position on softer surfaces with relative ease.


The 9500-D (Diesel) and 9500-G (Gasoline) models utilize a standalone power source and are most typically Truck-Mounted. With a wide array of Tooling/Supply Storage options, the truck-mounted models allow you to keep your operation mobile for extended periods without support vehicles. The 9500-D also provides for an optional Trailer Mount.


To learn more about the 9500 Series PowerProbe, please contact AMS.


The 9520-D (Diesel) PowerProbe runs off of a 60 hp liquid-cooled, turbo-charged diesel engine. It comes standard with a 350 ft-lb hydraulic hammer for direct push, groundwater, soil gas, and remedial injection type sampling. Like the 9520-VTR, this model can also be equipped with our 4,000 ft/lb auger motor and 3,000lb winch assembly. This model comes standard with an 80” probe stroke that will allow for the use of 5’ tooling. Contact your area sales rep to hear more.


The PowerProbeª 9520-SK models include a 72" probe stroke to allow use of 4'' tooling and a 90 ft-lb hammer with more options available. If a hollowstem auger capability is what you need, we have given you a choice of two auger drive head options that can be added to your skid steer model. Some carrier vehicle requirements are needed dependent on your choices.


The 9520-TR comes standard with the 90 ft-lb hydraulic hammer, and the option to upgrade to other hammer models. For those situations where you need to install groundwater monitoring wells, you can add an auger drive head. With the choice of two different auger drive heads, and 2 different hammer options, you can't go wrong with the 9520-TR. Some carrier vehicle requirements may be required dependant on the options chosen.


The new 9520-VTR PowerProbe™ is a versatile drill rig that can be used in most environmental and geotechnical applications. While retaining many of the same features of our larger PowerProbes™, the track-mounted 9520-VTR all-terrain model utilizes a smaller carrier and has the added benefits of more HP, improved fuel economy and emissions, positionable control panel, updated hydraulics, auxiliary output connections, and dual dozer blade verses the current comparable-sized AMS model (the 9500-VTR).


The New 9580-VTR PowerProbe™ is powered by a tier 4, 60 HP John Deere liquid-cooled diesel engine, and has an increased diesel fuel storage to 30 gallons. The new auger and hammer system has hydraulic pivot and locking systems, and the hammer, auger motor, winch, and auto-drop can all be positioned over the same borehole without realigning or repositioning the machine. The new auto-drop hammer has improved hammering capability and functionality, and the new 3,000 lb. hydraulic hi-speed winch requires less operator attention. The rig also features a stronger mast with a larger foot for increased stability, and has a more compact height and width – as well as a fully equipped weight under 12,000 lbs with a lower center of gravity. We have added a new hydraulic tooling rack with increased rod carrying capacity, a multi-functioning dozer blade, an all new control panel that allows you to run everything from a single position.

Contact Us about the 9500 Series