SST Piezometer Groundwater Sampling Kit

The SST Piezometer Groundwater Sampling Kit was designed in response to our clients’ needs for a manually operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling...

The 1-1/4” (outside diameter) X 14” SST Piezometer drive point can be connected to any 3' SST Piezometer Extension using heavy-duty single-lead threaded couplers. The male/male couplers are crucial for providing the same outside diameter the...

The 1-1/4" X 3' SST Piezometer Extension w/ Coupler is used to reach deeper depths if needed when sampling with AMS's Piezometer. The male-to-male couplers are crucial for providing the same outside diameter the entire way down the drive string; allowing...

1-1/4" Expendable Tips are used instead of the SST Piezometer, to avoid any damage while hammering to the target depths.   For questions on availability, Contact Us or see our FAQ section.

#50 Stainless Steel Mesh Screen.   For questions on availability, Contact Us or see our FAQ section.

The Piezometer Point Holder holds the 1-1/4" Expendable Tip while driving or hammering to target depths.   For questions on availability, Contact us or see our FAQ section.

Used as both a drop weight and sampling port, the GVP Dedicated Tip is connectedt to 3/16” (inside diameter) X 1/4” (outside diameter) Fluoropolymer or Poly Tubing via the Twist-to-Lock Connector, 3/16" Inner Diameter barbed adapter and...

The Piezometer Slotted Pull Adapter is threaded to a 1-1/4" X 3' SST Piezometer Extension for tubing to be ran up and through. The Piezometer Tee Jack Adapter is then threaded to the Piezometer Slotted Pull Adapter to extract the system from below ground...

The Piezometer Threadless Drive Adapter is used to drive Piezometer sampling accessories by simply placing it over the Male-to-Male SST Piezometer Coupler.   For questions on availability, Contact us or see our FAQ section.

The Piezometer Tee Jack Adapter is threaded to the Piezometer Slotted Pull Adapter which is then connected to a Big Foot Removal Jack in order to extract the system from below ground surface.   For questions on availability, Contact us or...

The SST Piezometer Screen #50 Mesh is an internal component to the 1-1/4” (outside diameter) X 14” SST Piezometer. This part can be removed and replaced within the Piezometer for proper decontamination in-between samplings, which is extremely...

The SST Piezometer Spring is an internal component to the 1-1/4” (outside diameter) X 14” SST Piezometer. This part can be removed and replaced within the Piezometer for proper decontamination in-between samplings, which is extremely...