null

Heavy-Duty Gas Vapor Probe Kit w/ Dedicated Tips & Retract-A-Tip w/ No Drill

Write a Review
SKU:
209.26
$4,359.69

Description

Excellent for investigating hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination, or other environmental concerns!

Our Heavy-Duty Gas Vapor Probe (GVP) Kits are equipped with all the necessary components found in regular GVP Kits, but with an added advantage - flighted augers. These augers are specifically designed to penetrate through tough and rocky soil conditions. This incredible kit also includes enough flighted extensions to pre-drill a hole up to 9 ft. The lead auger is designed with a hard surfaced tip for regular soil conditions, and a carbide tip for heavily compacted soil conditions. Additionally, our Heavy-Duty GVP Kits feature a larger wild bore concrete bit, allowing for easy clearance when sampling beneath concrete.

Note: Flighted augers allow horizontal or vertical sampling access. Pre-drill boreholes with flighted augers to extend the lifespan of your GVP equipment.

GVP Kits utilize a slide hammer or an electric combination rotary hammer drill along with GVP extensions to insert our stainless steel GVP tips to the desired sampling point. Before driving GVP tips, please ensure that the Fluoropolymer tubing is properly connected to the barbed fitting for convenient sampling.

Choose from our selection of two GVP tips specifically designed for our GVP Kits – GVP Dedicated Tips and GVP Retract-A-Tips.

GVP Dedicated Tips are strategically installed as permanent disposable sampling points. They serve the purpose of investigating hydrocarbon spills, underground storage tank and pipe leaks, landfill contamination, and hazardous waste.

GVP Retract-A-Tips are inserted into the soil and then opened for sample extraction. Due to their design, equilibrium time is reduced from final installation to sampling. In addition to their innovative design, Retract-A-Tips offer the incredible advantage of being easily decontaminated and ready for reuse at the next sampling point. They can also be used for shallow groundwater sampling.

 

Kit weighs 154lbs!

 

Kit Includes:

  • #210.01 - (1) Gas Vapor Probe Retract-A-Tip
  • #211.00 - (10) Gas Vapor Probe Dedicated Tip & Fluoropolymer Umbrella
  • #214.045 - (1) 5/8" National Fine Extension Drive Adapter to 3/4" Inner Diameter
  • #214.06 - (4) 5/8" X 3' Gas Vapor Probe Extension, 5/8" National Fine Thread
  • #214.09 - (1) 5/8" National Fine Gas Vapor Probe Tip Drive End
  • #214.105 - (1) Slide Hammer Adapter to 3/4" Outer Diameter
  • #214.18 - (1) SDS-Max Drill Adapter to 3/4" Outer Diameter
  • #214.20 - (1) 5/8" Male Thread to SDS-Max Drill Adapter
  • #214.26 - (1) 2-1/2" X 18" X 24" Wild Bore SDS-Max Bit
  • #215.00 - (1) 3/16" ID X 1/4" OD X 250' Fluoropolymer Tubing
  • #215.06 - (1) Hand Vacuum Pump
  • #403.10 - (1) 5/8" X 3' Extendable Tile Probe Complete
  • #403.11 - (3) 5/8" X 3' Tile Probe Extension, 5/8" National Fine Thread
  • #405.23 - (1) 2" X 3" Lead Auger w/ Hard Surfaced Tip, 5/8" Thread
  • #405.24 - (2) 2" X 3" Flighted Extension, 5/8" Thread
  • #405.26 - (1) 2" Carbide Tip, 2.375 OD, 5/8" Thread
  • #211.05 - (1) Removal Jack
  • #400.99 - (1) Regular Slide Hammer, 5/8" Thread
  • #430.01 - (1) 4' Deluxe Carrying Case 1750 Black

Accessories:

  • #213.94 - (1) DeWalt 120V 2" SDS-Max Combination Rotary Hammer Drill
  • #213.98 - (1) DeWalt 60V 2" SDS-Max Combination Rotary Hammer Drill
  • #214.055 - (1) Threadless Extension Drive Adapter to 3/4" Inner Diameter
View AllClose

0 Reviews

View AllClose