Soil Gas Samplers

White Syringe Caps (100 Pack).

Polycarbonate construction with 2 female luer connections and 1 male slip connection. The Luer connections can be attached directly to a 60 ml Syringe for environmental sampling. It can also be used to connect tubing as an on/off stop valve for air...

Flighted Augers are used to pre-drill boreholes. Pre-drilling with flighted augers also allows access to sampling points in horizontal and vertical angles. This auger doesn't come with any tips.

Gas Vapor Probe Foot Jack is specifically designed to extract AMS 5/8" diameter gas vapor probe extension rods. The special open slot design on the shackle/jaws allows you to rapidly connect and disconnect from the extension strand. There is no need to...

Polyethylene soil vapor implant is an economical way to install semi-permanent soil vapor monitoring wells. The polyethylene implant is a one-piece molded assembly made of high-density porous polyethylene.   Accessories: #214.98 - (1) 3/16" ID...

Stainless steel soil vapor implant is designed to be used as a vapor probe implant in vapor intrusion sampling, sub-slab sampling, soil gas sampling and more.   Accessories: #214.98 - (1) 3/16" ID X 1/4" OD X 50' Fluoropolymer Tubing #214...

Stainless steel (SST) mesh implants are constructed of a double woven SST wire screen. With the speedfit fitting, the implant will accept tubing sizes of 1/4" OD. The solid threaded end allows for either an anchor point anchor weight or open-hole...

The Hand Vacuum Pump is a simple system for both soil gas and groundwater sampling. It has a vacuum gauge release valve and fittings. For sites with no accessible electricity, samples can be taken into suitable test containers.

Fluoropolymer tubing can be used with a variety of soil gas sampling systems and can meet certain requirements for long-term monitoring, regulatory requirements, and project scopes of work. Fluoropolymer tubing is cost-effective for soil vapor surveys...

Fluoropolymer tubing can be used with a variety of soil gas sampling systems and can meet certain requirements for long-term monitoring, regulatory requirements, and project scopes of work. Fluoropolymer tubing is cost-effective for soil vapor surveys...

Fluoropolymer tubing can be used with a variety of soil gas sampling systems and can meet certain requirements for long-term monitoring, regulatory requirements, and project scopes of work. Fluoropolymer tubing is cost-effective for soil vapor surveys...

Fluoropolymer tubing can be used with a variety of soil gas sampling systems and can meet certain requirements for long-term monitoring, regulatory requirements, and project scopes of work. Fluoropolymer tubing is cost-effective for soil vapor surveys...

Concrete bits are made for fast, accurate drilling with a rotary hammer drill. This bit has a built-in SDS-Max adapter. Drilling depth is 18" and the overall length is 24".

Concrete bits are made for fast, accurate drilling with a rotary hammer drill. This bit has a built-in SDS-Max adapter. Drilling depth is 16" and the overall length is 21".

5/8" Threaded Male to SDS-Max Drill Adapter.

SDS-Max Drill Adapter to 3/4" Outer Diameter.

Slide Hammer Adapter to 3/4" Outer Diameter.

5/8" National Fine Gas Vapor Probe Tip Drive End. The fluoropolymer umbrella is folded before inserting it into the tip drive end. After being driven to the sampling point, the drive string is retracted – allowing the tip to fall out and the...

Gas Vapor Probe systems are equipped with two different styles of 5/8" outer diameter extensions: solid tile probe extensions, and hollow GVP rods. Extendable tile probe extensions are solid extensions designed to locate underground obstructions and to...

Gas Vapor Probe systems are equipped with two different styles of 5/8" outer diameter extensions: solid tile probe extensions, and hollow GVP rods. Extendable tile probe extensions are solid extensions designed to locate underground obstructions and to...