Stainless Steel Piezometer Groundwater Sampling Kit

Specifically designed for shallow groundwater investigations and long-term monitoring programs, this manually operated sampling kit is ideal for low-flow groundwater sampling and precise water level measurements up to 12 ft. (3.66 m) below ground surface. Built for rugged field conditions, this kit provides a semi-permanent access point for consistent, repeatable data collection across geotechnical, hydrogeological, and environmental applications.

A 1-3/4 in. (4.45 cm) regular auger is included for predrilling boreholes or clearing excess material between sampling intervals. At the core is a durable stainless steel drive-point piezometer, measuring 1-1/4 in. (3.18 cm) X 14 in. (35.56 cm), featuring a removable screen and spring assembly for thorough decontamination between uses. This preserves sample integrity during multiple deployments. With a 7/8 in. (2.22 cm) internal diameter, the piezometer supports various low-flow pumps—including bladder, peristaltic, and inertial (with foot valves)—making it well-suited for project-specific and regulatory-compliant low-flow groundwater sampling. It also accommodates bailers and 3/8 in. (0.95 cm) and 5/8 in. (1.59 cm) water level meters for accurate groundwater table monitoring.

During installation and removal, male-to-male couplers maintain a uniform outside diameter along the drive string, enabling smooth push and pull operations in the field.

For sampling through or beneath contaminated lithology, this kit includes 1-1/4 in. (3.18 cm) expendable tips with a stainless steel #50 mesh screen, protecting the drive-point piezometer while ensuring accurate sample recovery. A twist-to-lock connector enhances efficiency by simplifying post-run tubing deployment during sampling.

Note: Achievable depth is dependent on soil conditions. Also, please ensure that any AMS equipment you plan on using together have a compatible connection type.

Product Cut Sheet

Kit Weight: 168 lbs (76.20 kg)

Kit Includes:

• #406.04 - (1) 18" Rubber-Coated Cross Handle, 5/8" Thread
• #408.02 - (2) 3' Extension, 5/8" Thread
• #400.10 - (1) 1-3/4" Regular Auger, 5/8" Thread
• #400.93 - (1) Heavy-Duty Slide Hammer, 3/4" Thread
• #58067 - (1) 3/4" Male Thread to Piezometer Threadless Drive Adapter
• #58063 - (4) 1-1/4" X 3' Stainless Steel Piezometer Extension w/ Coupler
• #58062 - (1) 1-1/4" X 14" Stainless Steel Piezometer w/ Coupler
• #58069 - (1) Piezometer Point Holder
• #5004.58  (5) #50 Stainless Steel Mesh Screen
• #5004.56  (5) 1-1/4" Expendable Tip
• #214.98 - (1) 3/16" ID X 1/4" OD X 50' Fluoropolymer Tubing
• #5004.45 - (1) Twist-to-Lock Connector, 3/16" ID
• #212.05 - (1) Gas Vapor Probe Dedicated Tip Screen #50 Mesh
• #211.00 - (1) Gas Vapor Probe Dedicated Tip & Fluoropolymer Umbrella
• #58070 - (1) Piezometer Slotted Pull Adapter
• #58068 - (1) Piezometer Tee Jack Adapter
• #18253 - (1) Big Foot Removal Jack
• #421.10 - (2) 12" Crescent Wrench
• #430.05 - (1) 1" X 24" Nylon Brush
• #21151 - (1) Probe Wire Brush
• #430.01 - (2) 4' Deluxe Equipment Case

Accessories:

• #406.80 - (1) 18" Ratcheting Cross Handle, 5/8" Thread
• #21158 - (1) Stainless Steel Piezometer Screen #50 Mesh
• #21154 - (1) Stainless Steel Piezometer Spring
• #58064 - (1) Male-to-Male Stainless Steel Piezometer Coupler
• #2100.79 - (1) Geotech Geopump™ Peristaltic Pump Series II
• #24419 - (1) Ezyflow™ Water Sampling Pump
• #5052.40 - (1) 12 Volt Vacuum Pump