Well Management

The SST Piezometer Groundwater Sampling Kit was designed in response to our clients’ needs for a manually operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling...

The 1-1/4" (outside diameter) X 14" SST Piezometer drive point can be connected to any 3' SST Piezometer Extension using heavy-duty single-lead threaded couplers. The male/male couplers are crucial for providing the same outside diameter the entire way...

The 1-1/4" X 3' SST Piezometer Extension w/ Coupler is used to reach deeper depths if needed when sampling with AMS's Piezometer. The male-to-male couplers are crucial for providing the same outside diameter the entire way down the drive string; allowing...

1-1/4" Expendable Tips are used instead of the SST Piezometer, to avoid any damage while hammering to target depths.

#50 Stainless Steel Mesh Screen.

The Piezometer Point Holder holds the 1-1/4" Expendable Tip while driving or hammering to target depths.

Used as both a drop weight and sampling port, the GVP Dedicated Tip is connected to 3/16" (inside diameter) X 1/4" (outside diameter) Fluoropolymer or Poly Tubing via the Twist-to-Lock Connector, 3/16" Inner Diameter barbed adapter and lowered inside the...

The Piezometer Slotted Pull Adapter is threaded to a 1-1/4" X 3' SST Piezometer Extension for tubing to be ran up and through. The Piezometer Tee Jack Adapter is then threaded to the Piezometer Slotted Pull Adapter to extract the system from below ground...

This adapter is used to drive Piezometer sampling accessories by simply placing it over the Male-to-Male SST Piezometer Coupler.

The Piezometer Tee Jack Adapter is threaded to the Piezometer Slotted Pull Adapter which is then connected to a Big Foot Removal Jack in order to extract the system from below ground surface.

Get right to liquid sampling with this complete kit! The Stainless Steel Bomb Sampler Kit is used to obtain liquid samples from the top, bottom, or any intermediate level of storage tanks, tank cars, ponds, lagoons, and wells. The sampler's capacity is...

The Stainless Steel Bomb Sampler is used to obtain liquid samples from the top, bottom, or any intermediate level of storage tanks, tank cars, ponds, lagoons, and wells. The sampler's capacity is 21 oz (628 mL). For discrete sampling, a suspension nylon...

The SST Piezometer Screen #50 Mesh is an internal component to the 1-1/4" (outside diameter) X 14" SST Piezometer. This part can be removed and replaced within the Piezometer for proper decontamination in-between samplings, which is extremely valuable.

The SST Piezometer Spring is an internal component to the 1-1/4" (outside diameter) X 14" SST Piezometer. This part can be removed and replaced within the Piezometer for proper decontamination in-between samplings, which is extremely valuable.

Designed for low flow sampling! The Ezflow™ peristaltic water sampling pump can be used for various environmental operations, such as groundwater sampling and well purging. It's developed especially for bringing the advantages to low flow sampling...

1-1/2" Stainless Steel Bottom Fill Bailer Fitting.

Disposable bailers allow you to eliminate the time and costs of decontamination and cleaning. Clear polyethylene (PE) bailers are constructed with pure PE making them a sturdy bailer with no warping or collapsing. Non-weighted clear PE bailers are able...

7/8" Stainless Steel Bottom Fill Bailer Fitting.

1" Stainless Steel Bottom Fill Bailer Fitting.

7/8" Stainless Steel Bailer Check Ball.