Geotechnical Testing

24" Static Cone Penetrometer Starter Rod Assembly. The Starter Rod Assembly can withstand an axial force of 250 lb./ft (340 N*m) maximum.

24" Static Cone Penetrometer Extension Rod Assembly.

24" Static Cone Penetrometer Extension Inner Rod. The dual-rod construction isolates cone resistance from shaft friction.

24" Static Cone Penetrometer Starter Inner Rod. The dual-rod construction isolates cone resistance from shaft friction.

24" Static Cone Penetrometer Outer Rod.

Standard 60 Degree Static Cone Penetrometer Cone Assembly. The standard cone is a 60-degree vertex angled cone with an area of 1.5 cm2 .

O-Ring Packing Kit (2 Pack).

Large 60 Degree Static Cone Penetrometer Cone Assembly. A larger, optional cone with an area of 3 cm2 is available for use in soft soils.

The Field Vane Shear Tester Kit is used to measure in-situ undrained shear strength in clays. It is primarily intended for use in trenches and excavations at depths up to 3 m. This can be extended with additional optional extensions. The range of the...

16 X 32 mm Field Vane (0-200 kPa).

20 X 40 mm Field Vane (0-100 kPa).

The Static Cone Penetrometer (SCP) is used to evaluate the consistency of soils, their level of compaction, and the bearing capacity of shallow foundations and pavement subgrades. It includes the standard cone, starter rod assembly, pressuregauge, and...

Infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching, and drainage efficiencies. Rings are inserted into the turf by pushing and twisting on...

Infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching, and drainage efficiencies. Rings are inserted into the turf by pushing and twisting on...

Our pocket penetrometer provides rapid estimates of unconfined compressive strength of cohesive soils. Although pocket or hand penetrometers are used widely for checking consistency and providing rapid estimates of compressive strengths in the field,...

Our 1" Pocket Penetrometer Adapter Foot is available as an option for use in low-strength cohesive soils. Push the adapter foot in until the soil reaches the top of the foot where it begins to taper. Multiply readings by .0625 to compensate for the...

Easy to use with easy-to-read results! Our Pocket Vane Shear Test Kit provides a quick and efficient method for measuring the undrained shear strength of saturated, fine-grained, cohesive soils, both in the field and in the laboratory. With this Torvane,...

Geo Tester Dial Penetrometer set is used for on-site measurement of soil compaction by testing the foundation plane or boring samples. It gives readings of estimated unconfined compressive strength in TSF or kg/cm2 when used with the standard 1/4"...

Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series...

We've thrown it all together! Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in situ California Bearing Ratio (CBR) values of pavement base, subbase, and...