Soil Gas Samplers

4' Original Gas Vapor Probe Stainless Steel Extension w/ Liner Rod & Coupling.

The 12" Original GVP Base Complete comes with the 12" GVP base section, liner rod, and Male 5/8" National Coarse (NC) to Female 1/2" National Fine (NF) adapter.   Replacement Parts: #427.07 - (1) 12" Original Gas Vapor Probe Base Only #427.25 - (1)...

Original Gas Vapor Probe Stainless Steel 1/2" National Fine Coupling.

Original Gas Vapor Probe Stainless Steel 3/16" Liner Rod Coupling.

Original Gas Vapor Probe Barbed Adapter for 3/16" ID Tubing.

3' Original Gas Vapor Probe Stainless Steel 3/16" Liner Rod w/ Coupling.

4' Original Gas Vapor Probe Stainless Steel 3/16" Liner Rod w/ Coupling.

12" Original Gas Vapor Probe Stainless Steel 3/16" Liner Rod w/ Coupling.

1/4" X 12" Sub-Slab Stainless Steel Vapor Shaft Tube.

Sub-Slab Tube Plug (FEP).

Sub-Slab Gas Vapor Probe Kits are used to sample for volatile organic compounds (VOCs) beneath floor slabs during vapor intrusion investigations. Sub-Slab Kits provide a semi-permanent probe that allows for repeated sampling over time in order to assess...

The 12-volt vacuum pump is a diaphragm-style pump that is used for filling test containers. It has a 15" cord and plug. It is portable, and the pump will collect soil gas and groundwater samples into containers.

This spanner screwdriver is designed to work with the following products: Sub-Slab Gas Vapor Probe Tamper-Resistant Top Cap 3" Aluminum Port Cover 3" Brass Port Cover 3" Black Port Cover

Stainless steel (SST) mesh implants are constructed of a double woven SST wire screen. With the stepped fitting, the implant will accept tubing sizes of 1/4" OD through 1/2" OD. The solid threaded end allows for either an anchor point anchor weight or...

Stainless steel (SST) mesh implants are constructed of a double woven SST wire screen. With the stepped fitting, the implant will accept tubing sizes of 1/4" OD through 1/2" OD. The solid threaded end allows for either an anchor point anchor weight or...

Polyethylene tubing can be used with a variety of soil gas sampling systems and can meet certain requirements for long-term monitoring, regulatory requirements, and project scopes of work. Polyethylene tubing is cost-effective for soil vapor surveys...

This .19" ID X .39" OD Silicone tubing is often used as bridge tubing between the sampler fittings and either Fluoropolymer, Polyethylene, and Nylaflow Nylon tubing. If the correct (#15 or #16) tubing is used, it creates a great seal for tubing and...

This .19" ID X .39" OD Silicone tubing is often used as bridge tubing between the sampler fittings and either Fluoropolymer, Polyethylene, and Nylaflow Nylon tubing. If the correct (#15 or #16) tubing is used, it creates a great seal for tubing and...

Tedlar bags are offered in a wide variety of sizes. One liter, 3 L, 5 L, and 10 L bags are available. Tedlar bags are recommended in many US EPA methods including TCLP and methods TO-3 (VOCs), TO-12 (NMOC), TO-14A (VOCs), TO-15 (VOCs), and ASTM D-5504...

3" Stainless Steel Implant, 1/4" SS Compression.