null

Bulk Density Soil Sampling Kit w/ Hammer Head Handle, 5/8" Thread

Write a Review
SKU:
400.80
$1,943.92

Description

This unique sampling kit comes with everything necessary to take accurate interval specific core samples to a depth of 3'. It is ideal for sampling the soil surface, in auger holes, or in profile pits. The Soil Sample Rings found in this kit are made from .062w Stainless Steel tubing. These Stainless Steel Soil Sample Rings are ideal for laboratory studies and for undisturbed core samples. The volume of each 2” X 2” Stainless Steel Soil Sample Ring is 90.59 cubic centimeters. From this known volume and the weight of the sample liner, you will be able to calculate the bulk density of the soil sample. *An accurate determination of bulk density starts with proper sampling technique to ensure that the sample collected represents the soils natural condition.

Bulk Density Soil Core Sampler Exclusive Features:

  • Standard AMS Core Samplers have a 1”+ gap between the tip of the core sampler and where the sample liner internal shelf begins. The sampler included in this kit has a much shorter 5/16” gap which provides a more representative core and reduces compaction as the soil enters the sampler.
  • Liners and core sampler are held to extremely tight tolerances.
  • Core Sampler Cap has a built-in waste barrel which provides a full 2” of relief. This helps eliminate compaction from overdriving the sampler. It also eliminates the need to load multiple rings inside the sampler, which can cause sample blow by and skew sample calculations.

Achievable depth is dependent on soil conditions.

 

Kit weighs 54lbs!

 

Kit Includes: 

  • #11677 - (1) Dead Blow Hammer 37oz
  • #400.07 - (1) 2-3/4" Regular Auger, 5/8” Thread
  • #400.52 - (1) 2-3/4" Planer Auger, 5/8” Thread
  • #401.27 - (1) 12" Hammer Head Cross Handle, 5/8" Thread
  • #404.281 - (25) 2" X 2" Bulk Density Stainless Steel Liner
  • #406.04 - (1) 18" Rubber-Coated Cross Handle, 5/8" Thread
  • #401.27 - (1) 12" Hammer Head Cross Handle, 5/8" Thread
  • #418.10 - (50) 2" Plastic End Cap
  • #421.10 - (2) 12" Crescent Wrench
  • #421.29 - (1) Universal Slip Wrench
  • #430.07 - (1) 2" X 12" Nylon Brush
  • #408.01 - (1) 2' Extension, 5/8” Thread
  • #400.55 - (1) 2-1/2" Open-Face Auger, 5/8” Thread
  • #55647 - (1) Idaho Spoon
  • #400.81 - (1) 2" X 2" Bulk Density Cup
  • #400.82 - (1) 2" Bulk Density Cap, 5/8" Thread
  • #430.25 - (1) 3’ Deluxe Carrying Case 1700 Black
  • #430.26 - (1) Small Aluminum Carrying Case

 

For questions on availability, Contact us or see our FAQ section.

View AllClose

Additional Information

Thread Type:
5/8"
View AllClose

0 Reviews

View AllClose